Products
We offer a variety of prefabricated, preinsulated piping products to meet a wide range of applications.
Need help determining which Tricon Piping System is right for your application? Use our Selection Guide.
Tricon Double-Con
Download Product Sheet
Overview
- Application:
- Chemical Products, Petroleum Products
- Service Pipe:
- Carbon Steel, Copper, Stainless Steel, FRP, PVC, Polyethylene
- Insulation:
- Temp:
- Ambient
- Nom Length:
- 20 Ft. - 40 Ft.
System Specifications
| Option 1 | Option 2 | |||
| Pipe Size | FRP Jacket O.D. | FRP Jacket Wall | Steel Jacket Wall | Steel Jacket Wall |
| ½” | 3.50” | .090” | 3.500” | .120” |
| ¾” | 3.50” | .090” | 3.500” | .120” |
| 1” | 4.50” | .085” | 4.500” | .120” |
| 1¼” | 4.50” | .085” | 4.500” | .120” |
| 1½” | 4.50” | .085” | 4.500” | .120” |
| 2” | 4.50” | .085” | 4.500” | .120” |
| 2½” | 6.63” | .120” | 6.625” | .134” |
| 3” | 6.63” | .120” | 6.625” | .134” |
| 4” | 8.64” | .140” | 8.625” | .134” |
| 5” | 8.64” | .140” | 8.625” | .134” |
| 6” | 10.70 | .170” | 10.750” | .134” |
| Option 1 | Option 2 | |
| Pipe Size | FRP Jacket O.D. | Steel O.D. |
| ½” + ½” | 4.50” | 4.500” |
| ¾” + ¾” | 4.50” | 4.500” |
| 1” + 1” | 6.63” | 6.625” |
| 1¼” + 1¼” | 6.63” | 6.625” |
| 1½” + 1½” | 6.63” | 6.625” |
| 2” + 2” | 8.64” | 8.625” |
| 2½” + 2½” | 8.64” | 8.625” |
| 3” + 3” | 10.70” | 10.750” |
TRICON Double-Con Containment System is a factory fabricated containment system for above and below ground transportation of hazardous fluids. The most widely used system can be designed with a steel carrier pipe and a secondary steel outer pipe.
Carrier Pipe:
Carbon steel service pipe shall be standard weight or extra heavy, A53 ERW or A106 seamless beveled for welding. (Stainless Steel piping shall be Type 304L or 316L. – Copper piping to be Type K cleaned and capped for medical use or Type L ) All joints for pipe 2 ½” and larger in size shall be butt-welded. Sizes 2” and smaller shall be socket welded. Straight lengths of piping will be supplied with 6” of piping exposed at each end for field joint fabrication. Pipe lengths to be supplied in 21-42 ft. lengths.
Containment Pipe For Above Grade:
The outer conduit shall be a smooth wall, spiral welded steel conforming to ASTM Specification A- 139, or electric resistance welded steel pipe conforming to ASTM Specification A-135, or as specified.
Containment Pipe Coating For Above Grade:
Red Oxide Primer, factory coated up to 3-4 mils dry film thickness.
Containment Pipe For Below Grade:
The outer conduit shall be a nonmetallic fiberglass conforming to ASTM 2310 standard classification TRP-11CX and ASTM D2996 specification RTRP 11CF1-5430, RTRP-11AF1-2214, RTRP-11AF1- 2216.
Steel Containment Pipe Coating For Below Grade:
Steel conduit exterior shall be factory coated with a Fusion Bonded Epoxy. All exterior surfaces of the conduit shall be shot blasted prior to the application of the coating. Fusion Bonded Epoxy is a N.A.C.E & N.A.P.C.A. approved corrosion coating.
Installation:
No Piping shall be installed in standing water. Trenches shall be maintained dry until final field closure is complete. The installing contractor shall handle the piping system in accordance with the directions furnished by the manufacturer and as approved by the architect and engineer. The service piping shall be hydrostatically tested to 1-1/2 times the operating pressure, or as specified in the contract documents. The non-metallic outer jackets shall be tested to 5 psi and 15 psi for the metallic secondary containment. The test shall be maintained for a minimum time of 1 hour. EXERCISE DUE CARE WHEN INSTALLING AND TESTING THE PIPING SYSTEM. DO NOT TEST WITH AIR OR GAS.